PipeLiner 5000 11-70 PW and PipeLiner 5100 PW are two-component, 1:1 ratio, rapid curing, elastomeric structural lining systems developed for high build applications of 30 – 500 mil cross sections. Both products can be sprayed in low temperatures, extremely humid conditions and at 350-400 mils thick, or almost 3/8 of an inch, in a single pass without stress cracking.
Pipeliner 5000 and 5100 have passed the rigorous testing requirements of the NSF/ANSI 61 Section 5 potable water standard and is Truesdail Laboratories listed. The polyurea/polyurethane systems are sprayed with high pressure plural component spray equipment and can also be sprayed with a cartridge gun for repairs. Thickness of the lining will vary depending on the application, typically from a minimum of 30 mils up to unlimited thickness.
Pipeliner 5000 and 5100 have passed the rigorous testing requirements of the NSF/ANSI 61 Section 5 potable water standard and is Truesdail Laboratories listed. The polyurea/polyurethane systems are sprayed with high pressure plural component spray equipment and can also be sprayed with a cartridge gun for repairs. Thickness of the lining will vary depending on the application, typically from a minimum of 30 mils up to unlimited thickness.
FEATURES AND BENEFITS
- Complies with NSF/ANSI 61 Section 5 potable water standard
- Rapid cure times for quick return to service
- High build cross sections
- Robust application window with ability to spray at low temperatures and high humidity
- High physical properties including tensile, tear, and compressive properties
- Excellent leveling properties
- Excellent impact resistance
- Excellent chemical resistance and corrosion resistance
- Bonds to virtually all substrates of any dimension, including metals, woods, concrete and fiberglass
- 100% solids, zero VOCs, no solvents
TYPICAL APPLICATIONS
- Often used to repair aging and badly damaged gas, oil, sewer and water/wastewater tanks and pipelines
- Creates self-supporting polyurea pipe with a pipe
- Maintenance coating in immersion conditions
- Concrete waterproofing
- Geotextile fabric lining
- Holding tanks
- Containment areas
- Ponds and reservoirs
- Storage tanks
- Aerators, digesters, sludge bins & wet wells
